FEATURES
◆ Minimize Wait Time for Hot Water
The Thermoflow UT10 is a point-of-use electric mini-tank heater which can stores up to 2.6 Gallons (10L) of water to supply hot water quickly. This heater can supplement a primary water heating source, or be used under a single sink. There’s minimal stand-by loss from this premium mini-tank water heater, saves water by eliminating the wait for hot water to reach your faucet.
◆ Active Protection Circuit for Safe Installation
If the water heater does not come out with hot water when it’s already connect to the electric supply, then the water heater will cut off the electric supply automatically to prevent the water heater from overheat. This also reduces the risk of damage to the water heaters.
◆ Thermostop function,Low Standy Loss Power Consumption
Selectable temperature range between 45℉ to 167℉, two modes options, energy saving mode and frost protection mode, suitable for any season. The maximum temperature raise is 167℉(75℃) for 2.6 GPM and the minimum temperature raise is 45℉(7℃). This also reduces the risk of damage to the water heaters.
IMPORTANT TIPS
1. A SAFETY VALVE IS NOT NECESSARY FOR INSTALLATION!
2. DO NOT install heater in a location where there is a potential for freezing.
3. BEFORE you connect the device to the electrical supply the device must be filled with water.
4. DO NOT remove the heater cover or open the unit without first turning off the power at the breaker panel.
5. Please read the instruction manual carefully before you install or using the water heater!
PACKAGE INCLUDES
1X 2.6 Gallons mini tank water heater
2X 1/2 inches brass bushings
1X instruction manual
NOTICES: Shower head, pedestal and water heater hose are NOT INCLUDED!
USD